CONDITION MONITORING SERVICES IN OMAN
We are one of top Condition monitoring services in oman by NDT and electrical inspection services of Thermography Inspection, Noise monitoring, Vibration analysis, Electrical leak testing, PAT Testing and Megger Testing Services at major marine ports of oman. EIWAA Marine condition monitoring services in oman provides maintenance and Inspection Services of Thermography Inspection, Noise monitoring and Vibration monitoring services.
Our maintenance solution are Preparation of Noise Specifications, Noise Analysis at Various locations, Noise Measurement service, Machinery vibration measurements, Noise Survey Services, Noise monitoring, Noise analysis, troubleshooting and diagnosis, Noise Measurement Service and Noise analysis of structural and piping vibrations at various operating frequency and Recommendation to meet the acceptable noise level measurements. EIWAA Marine Services uses PAT Testing services, Earth Testing services and Megger Testing Services for electrical inspection and certification services of ships and vessels.
Infrared thermography services is the science of employing non-contact thermal imaging technologies to acquire and analyze thermal data. It is based on temperature mapping and the distribution of radiant thermal energy (heat) radiated from a target surface using a measurement device. In Thermography testing services in oman, the condition of machinery, processes, and installations can therefore be monitored and diagnosed using temperature as a critical metric. We offer a variety of NDT Inspection services under the Predictive Maintenance Inspection including Thermography Testing Services, Noise Testing, Lux Survey, and Vibration Monitoring services. To analyze electrical switchboards or panel boards as well as building leakages, thermography testing services are using for every year.
THERMOGRAPHY INSPECTION SERVICES IN OMAN
Infrared thermography is the science of employing remote thermal imaging technologies to acquire and analyse thermal images. It is based on thermal mapping the distribution of radiant thermal energy (heat) radiated from a target surface using a measurement device. In Thermography testing service, the condition of machinery and installations can therefore be monitored and diagnosed using temperature as a critical data. Thermal imaging services can be used to detect hot spots in electrical systems, motors, and other equipment. The infrared region of the light spectrum, which is invisible to the human eye, is used by the thermal scanning known as thermal imaging service. The ability to observe location with or without any visible illumination or light is provided by infrared (IR) thermography, or thermal scanning, as they are commonly referred to.
NOISE SURVEY IN OMAN
Our reporting may include Noise Survey, Noise Specifications, Noise Analysis , Noise Measurement service and Noise map preparations. Noise Survey Services in Oman include Noise monitoring, Noise analysis, troubleshooting and diagnosis, Noise Measurement Service and Noise analysis of structural and piping vibrations at various operating frequency and Recommendation to meet the acceptable noise level measurements. Ships and Rigs are subject to noise level regulations set by organizations such as the International Maritime Organization (IMO) and IACS. Conducting noise testing services helps in the early detection of problems, allowing for timely maintenance and repairs to prevent equipment failures and downtime.
OFFSHORE APPROVALS
- All Major Classification Society under IACS
- Llyord’s Register
- American Bureau of Shipping(ABS)
- Indian Register of Shipping (IRS)
- Bureau Veritas (BV)
- Det Norske Veritas(DNV)
- ISO/IEC 17020
- All Major Ports of Oman
VIBRATION MONITORING
Vibration analysis in Oman involves using sensors to monitor the vibration levels of rotating equipment, such as pumps, motors, and turbines. Changes in vibration levels may misalign, imbalance, or wear in the rotating equipment. Vibration monitoring services in plants and piping systems are essential to ensure the safe and efficient operation of industrial facilities. By implementing vibration monitoring services, plant operators can detect problems early, prevent unexpected downtime, reduce downtime, and extend the lifespan of the equipment.
Vibration analysis services in Oman help to detect early signs of equipment faults such as misalignment, imbalance, bearing wear, and structural issues. Vibration analysis in Oman provides valuable insights into the performance of offshore equipment by measuring and analysing vibration levels. Vibration analysis can also be used for risk-based assessment purposes in offshore environments. Vibration analysis services continuously monitor equipment health from onshore locations and receive real-time alerts in case of abnormal vibration levels.
ELECTRICAL INSPECTION SERVICES IN OMAN
Electrical appliance safety and compliance with HAS regulations are guaranteed by our PAT testing services in oman. The industrial, marine, and oil & gas sectors are all covered by these portable appliance testing services in oman. The effectiveness of insulation and the absence of short circuits are measured by resistance testing services and electrical inspection. Electrical leak testing Services in oman is to quantify the amount of current that leaks from appliances to the ground. The insulation resistance of different electrical components in the oilfield services is assessed using our Megger and Earth pit testing services in oman for electrical systems.
To make sure that any exposed metal components are correctly linked to the ground, our electrical engineers perform annual earth continuity testing services. Insulation Resistance testing services in industrial field assesses how well insulation works and whether short circuits are possible. Electrical leak testing services in oman covers the scope of thermographic survey, PAT Testing, Earth Testing and Megger Testing services to quantify the amount of current that leaks from appliances to the ground
FREQUENTLY ASKED QUESTIONS
Our preventive maintenance inspection and condition monitoring services of thermography Inspection, Lux Survey, Noise Survey and Vibration monitoring Services have key roles in Ships, Vessels, and offshore Rigs maintenance schedule. EIWAA Oil and Gas Services is the approved NDT Inspection Company in Oman for performing condition monitoring services with PDO Approvals.
The primary instruments for measuring noise are the sound level meter (SLM), integrated sound level meter, and noise dosimeter. IMO Resolution A.468(XII): Code on Noise Levels on Board Ships is the standard for noise in the Noise Survey Service. Our real-time octave band analyzer, which combines a field noise level calibrator and a sound level meter with octave and 1/3 octave band real-time display, is our noise testing tool. It conforms with IMO Resolution A.468(XII)—Code on Noise Levels on Board Ships—and the requirements of ANSI and IEC Type 2 standards.
The technique of recording deviations from a system's preset vibration and observing irregularities is known as vibration analysis. Any reciprocating object will vibrate, and the frequency, amplitude, and intensity of these vibrations will all vary. Vibration measurements are used by a vibration monitoring service to look for anomalies and other problems with a machine's condition.
Ships will undergo periodic thermographic inspections, and a significant thermographic survey will be carried out every five years. A non-destructive testing technique called thermography inspection is used to identify building leaks and electrical switchboard leaks in ships and other boats. Thermal imaging of the engine room's electrical switchboard and panelboard is covered by infrared thermographic survey services for ships and boats in accordance with SOLAS regulations. Thermography inspection services are used to detect electrical leaks in electrical panel boards using thermal imaging, and to detect electrical leaks in ships and vessels using thermographic surveys and boiler/furnace inspection using thermal monitoring.