• April 27, 2024
  • ICAD III, Abu Dhabi, UAE
Home | Services | Rope Access & NDT | Condition Monitoring
Predictive maintenance survey

Condition Monitoring

Condition monitoring services at offshore rigs is crucial for ensuring the safety and efficiency of operations. It involves the continuous monitoring of various equipment and systems to detect any signs of malfunction or potential failure. This can include monitoring for vibration, temperature, pressure, and other parameters that may indicate a problem. EIWAA Marine provides NDT Inspection and condition monitoring services in UAE by noise survey,light survey,Thermography Inspection, Vibration Monitoring services etc. Vibration Monitoring Service, Vibration Analysis Service & Vibration Survey are offered by EIWAA Marine Services as preventative maintenance inspection services for rotating and reciprocating equipment. Electrical panel board leakage testing provided by EIWAA marine NDT Inspection Services and the relevant test may be Thermography Testing services, Marine Thermal Imaging and Thermographic Survey.

Thermography Inspection

Infrared thermography is the science of employing non-contact thermal imaging technologies to acquire and analyse thermal data. It is based on mapping the distribution of radiant thermal energy (heat) radiated from a target surface using a measurement device. In Thermography testing service, the condition of machinery, processes, and installations can therefore be monitored and diagnosed using temperature as a critical metric. Thermal imaging cameras can be used to detect hot spots in electrical systems, motors, and other equipment. This can help to identify potential issues such as overheating or insulation breakdown. The infrared region of the light spectrum, which is invisible to the human eye, is used by the unique technology known as thermal imaging service. The ability to observe one's surroundings with or without any visible illumination or light is provided by infrared (IR), thermography, or thermal scanning, as they are commonly referred to.

Noise Survey

Our reporting may include Preparation of Noise Specifications, Noise Analysis at Various locations, Noise Measurement service and Noise map preparations. Noise Survey Services in UAE include Noise monitoring, Noise analysis, troubleshooting and diagnosis, Noise Measurement Service and Noise analysis of structural and piping vibrations at various operating frequencies and Recommendation to meet the acceptable noise level measurements. Ships and vessels are subject to noise level regulations set by organizations such as the International Maritime Organization (IMO) and national maritime authorities. Conducting noise testing allows for the identification of high noise areas and enables the implementation of measures to control and reduce noise levels to protect the well-being of crew members. Conducting noise testing helps in the early detection of problems, allowing for timely maintenance and repairs to prevent equipment failures and downtime.

Offshore Approvals

EIWAA Marine condition monitoring Services approved by all the Major IACS classification Societies with ISO/IEC 17020 accreditations and Major Port Approvals. 
  • All Major Classification Society under IACS
  • Llyord’s Register
  • American Bureau of Shipping(ABS)
  • Indian Register of Shipping (IRS)
  • Bureau Veritas (BV)
  • Det Norske Veritas(DNV)
  • ISO/IEC 17020
  • All Major Ports of UAE

Noise Test

Vibration Analysis

Thermography Inspection

Vibration Monitoring

Vibration analysis involves using sensors to monitor the vibration levels of rotating equipment, such as pumps, motors, and turbines. Changes in vibration levels can indicate misalignment, imbalance, or wear in the equipment. Vibration monitoring in plants and piping systems is essential to ensure the safe and efficient operation of industrial facilities. Excessive vibrations can indicate potential issues such as equipment malfunction, imbalance, misalignment, looseness, or structural problems. By implementing vibration monitoring services, plant operators can detect problems early, prevent unexpected downtime, reduce maintenance costs, and extend the lifespan of the equipment. Vibration analysis services helps in detecting early signs of equipment faults such as misalignment, imbalance, bearing wear, and structural issues. Vibration analysis provides valuable insights into the performance of offshore equipment by measuring and analysing vibration levels. By using vibration analysis data, offshore operators can implement a condition-based maintenance approach. This means that maintenance activities are scheduled based on the actual condition of the equipment rather than on a fixed schedule. Vibration analysis can also be used for risk assessment purposes in offshore environments. Vibration analysis services that offer remote monitoring allow operators to continuously monitor equipment health from onshore locations and receive real-time alerts in case of abnormal vibration levels.

Frequently Asked Questions

Our predictive maintenance and condition monitoring services of thermography Inspection, Lux Survey, Noise Survey and Vibration monitoring Services have a vital role in Ships, Vessels, and offshore Rigs maintenance schedule. EIWAA Oil and Gas Services is the approved NDT Inspection Company in UAE  for performing condition monitoring services with ADNOC approvals.

The noise dosimeter, integrated sound level meter, and sound level meter (SLM) are the three most used tools for measuring noise. In Noise Testing Service. Standards for noise in Noise Survey Service are IMO Resolution A.468(XII) – Code on Noise Levels on Board Ships. Our instrument is Real time octave band analyzer –integrating sound level meter with octave and 1/3 octave band real time display with Field noise level calibrator. Meets ANSI and IEC Type 2 standards compliance with IACS Regulations & IMO Resolution A.468(XII) – Code on Noise Levels on Board Ships. Proper arrangement of Soft and elastic material between ship hull and machineries to reduce noises.

Vibration analysis is the process of keeping track of deviations from a system's predetermined vibration signature and searching for anomalies. Any moving object will vibrate, and these vibrations will vary in amplitude, intensity, and frequency. A vibration monitoring service uses vibration measurements to check for abnormalities and other anomalies in a machine's health.

Thermographic Inspection of ships to be performed periodically and major thermographic survey will be performed every 5 Years. Thermography Testing service is a non-destructive testing method to find out the leakages of building and electrical leakages of switchboard in ships/vessels. Infrared thermographic survey in ships and vessels covers thermal imaging of the engine room’s electrical switchboard and panel board as per SOLAR compliance. Thermography Inspection is used to find out the electrical leak detection of electrical panel boards by thermal imaging, Boiler/furnace inspection by thermal monitoring and thermographic survey to find out electrical leakages in ships and vessels.

Open chat
1
Hello
Can we help you?